Glasses

Metal Safety Glasses


Answers

v2 metal safety glasses in the uk plz?



Here, found the link below.Wish it is the correct ones. But i suspect since its engineering, u need stronger ones.

Safety Glasses drop test #7 Metal Bin


Safety Glasses drop test

How do I get rid of metal box inside fireplace?

I just bought this house and it burns wood but there is this huge ugly looking metal black box in it, which is where we have to put the wood and close the doors, you can't even see the wood inside of it, I dont know too much about this but im wondering if i can get rid of this box and have a set of nice glass doors put in so it for the safety part...obviously i would call a pro to do it, but will it be expensve?

thanks!


Yes you can remove it, it sounds like a wood burning insert. They are 50 times more efficient, but they usually do not have glass to see the fire. Up North, keep the insert and replace later with a pretty one. Down South, you can convert back to a real fireplace.

FIRST: Have a professional check out the chimney, it may be cracked and the previous owner put in the insert. Chimney repair is very expensive, so the insert is the best fix. They may of had a flue insert, (inserted into the chimney), and that needs a new connection to the fireplace.

Have a pro look it over, a chimney fire is no funny thing.

Encon Wraparound Veratti 302 Safety Glasses, Espresso Lens, Metal Frame (Pack of 1)
Encon Safety

Price: $11.85 $11.72

Fog free: No
Lightweight and durable metal frame
Scratch resistant lenses: Yes

Automotive and safety questions - need "best answer" help!?

1. If it explodes, a pail of gasoline could:

_____ a. cause little harm.

_____ b. start a small fire.

_____ c. level a building.

_____ d. level a city block.

2. You should store oil-soaked rags in:

_____ a. plastic bags.

_____ b. a mesh bag to allow the rags to dry.

_____ c. an airtight metal container.

_____ d. a locked cabinet.

3. The first step you should take when there is an emergency is to:

_____ a. evacuate the building.

_____ b. call 911.

_____ c. shut all windows and doors.

_____ d. alert those in charge.

4. A fire composed of burning wood, paper, and light combustibles is a __________ fire?

_____ a. Class-A

_____ b. Class-B

_____ c. Class-C

_____ d. Class-D

5. What should you do to change a Class-C fire into a Class-A or Class-B fire?

_____ a. Spray it with water.

_____ b. Use a dry chemical extinguisher.

_____ c. Shut off the electrical power.

_____ d. Smother it with damp rags.

6. What should you do to put out a Class-D fire?

_____ a. Spray it with water.

_____ b. Aim compressed air at it.

_____ c. Shut off the electricity.

_____ d. Apply special powdered chemicals.

7. A significant hazard of standing in front of a vehicle to fight an engine fire is that:

_____ a. a shock-mounted bumper could explode, turning it into a projectile.

_____ b. the headlights could explode, spraying glass.

_____ c. the vehicle could roll.

_____ d. the radiator could burst.

8. After a piece of unsafe electrical equipment is taken out of service, it should be:

_____ a. "red tagged."

_____ b. "blue tagged."

_____ c. removed from the shop.

_____ d. stored in a locked cabinet.

9. If a man is choking on a piece of food but can make noises, you should:

_____ a. perform CPR (cardiopulmonary resuscitation).

_____ b. perform the Heimlich maneuver.

_____ c. slap him on the back.

_____ d. stay with him and encourage him to cough it out.

10. Safety red represents:

_____ a. warning.

_____ b. first aid.

_____ c. radiation hazard.

_____ d. danger.

11. A __________ cross should be placed on any first-aid equipment.

_____ a. red

_____ b. green

_____ c. blue

_____ d. orange

12. One advantage of wearing a full-face shield instead of safety glasses is that it:

_____ a. protects both the eyes and the face.

_____ b. is more comfortable.

_____ c. is less expensive.

_____ d. doesn't scratch as easily.

13. Any sound in a shop that is over _____ decibels (dB) can cause severe hearing damage over short periods of time.

_____ a. 50

_____ b. 70

_____ c. 80

_____ d. 100

14. Which one of the following tools routinely produces sound pressure levels in excess of 100 dB?

_____ a. Hydraulic jacks

_____ b. Air impact wrenches

_____ c. Air conditioning recycling equipment

_____ d. Regulated air pressure safety nozzles

15. Two of the most deadly materials found around an auto shop are:

_____ a. used motor oil and gasoline.

_____ b. asbestos and R-12 refrigerant.

_____ c. hydraulic fluid and brake fluid.

_____ d. ethylene glycol and windshield washer solvent.

16. A blast of compressed air at 40 psi (pounds per square inch) pressure can:

_____ a. drive metal chips at speeds of 70 miles per hour or more.

_____ b. rupture an ear drum.

_____ c. cause a brain hemorrhage.

_____ d. do all of the above.

17. High-pressure compressed air should not be used to:

_____ a. blow dust off parts.

_____ b. inflate tires.

_____ c. operate jacks.

_____ d. operate lifts.

18. When using a floor or hydraulic bumper jack, the:

_____ a. transmission should be in park or in gear.

_____ b. parking brake should be set.

_____ c. vehicle should be free to move.

_____ d. wheels should be blocked.

19. After raising a vehicle with a jack:

_____ a. place jack stands under the vehicle frame.

_____ b. release the parking brake.

_____ c. place the jack handle in the lowered position.

_____ d. turn the steering wheel to the right.

20. A shop's 220-volt electrical outlets have:

_____ a. two "hot" wires and one ground wire.

_____ b. one "hot" wire and two ground wires.

_____ c. one "hot" wire and one ground wire.

_____ d. two "hot" wires and no ground wire.


Question #1 is a trick question. An uncovered pail cannot explode.

400 fps airsoft question, regarding safety.?

Ok, well, to begin...
Me and my friends (were all around 13-14 years of age) just got into airsoft, but we've been using guns ranging 240-300 fps. Yopu know the cheap 'child play' guns.
Well, we really enjoyed it and some of us are getting really good guns.
Me, for examle, am getting a full metal m4a1 carbine that shoots 400 fps with a 300 round magazine.

But i watched a video of it shooting, and it seemed, well, dangerous. It left dents in a shaving creme can and exploded a kiwi with a burst or so on automatic.
My point it, I dont want to get this gun (and some of us are getting even stronger guns, the best being 480fps), and open up in the moment at point blank and really hurt somebody.

This may sound REALLY stupid, but im just watching out for safety.
We all wear safety glasses, hoodies and jeans when we play.
Any opinions?


Paintball has a rule where under 10 feet you demand that they surrender, and they have to. Keeps people from really getting hurt.

How do I get a piece of metal embedded out of my eye out?

I work for a company that makes and sells explosives to the military. I was out and we detonated a explosive that have a thin brass casing. i was being stupid and wasn't behing the safety glass. I piece of very hot metal has been embeded in my eye. I cant feel it but when i look in the mirror i see it! should I go see a eye doctor to get it out?
NOTE: IT IS EMBEDDED IN MY EYE AND AND IS STICKING IN THE COLORED PART OF IT.


Why aren't you in theemergency room instead of here asking such a foolish question?

GO get there now before you lose the sight in that eye. You are still here. GO NOW, GET.


  • Buy Cheap

  • How to Paint a Metal Bed Headboard | DoItYourself.com

    A metal bed headboard is a timeless classic. Whether you bought yours, or inherited it from a family member, chances are it needs freshened up. Then again, maybe you are just redecorating and want to change the color. In a weekend's time, you can give your metal headboard a fresh new look.

    Supplies Needed: Drop cloths Paint remover (for metal) Paint scraper Ventilator mask Safety glasses Rubber gloves Rags Fine steel wool Primer Paintbrush Spray paint (for metal) Clear coat spray Step 1 - Prepare Your Headboard

    First, remove your headboard from your bed and take it to an area that will allow you plenty of room to work, like your yard or garage. Lay the headboard on the drop cloth. Be sure to stow away any screws or bolts you'll need for later reassembly. Get out your paint remover, ventilator mask, and safety glasses.

    Step 2 - Remove Debris and Old Dirt

    Wearing your safety glasses, rubber gloves, and ventilator mask, open the paint remover and use the applicator to get a good coat all over one side. After you have covered the entire side, allow it to sit on the headboard for 20 to 30 minutes. The remover will melt the paint allowing it to scrape off easily. When time is up, use the paint scraper to gently scrape the melted paint off. Take it off in long strips, not pressing to hard so you do don't scratch the metal beneath. To get into any hard to reach areas, use fine steel wool to gently loosen the finish, then wipe. If you still have some paint left on the headboard, repeat the process in those areas. Next, turn your headboard over and repeat this process on that side. After you have both sides done, you are ready to apply primer.

    ...

    Read more...

    News

    Breaking: Nissan unveils NV commercial van, available in three different flavors

    Autoblog (blog) - Mar 11, 2010

    High Roof models offer an available overhead console designed to hold work gloves, legal size binders, safety glasses and system books. and more »
    Soccer-playing robots from 40 student-led teams descend on Kettering University

    The Flint Journal - MLive.com - Mar 07, 2010

    FLINT, Michigan -- You wouldn't know it from under his safety glasses, but EngiNERD Alex Mikolaizik of Grand Blanc, and more »
    MIVT: Saving sight: Saving lives

    WCAX - Mar 06, 2010

    The Canadian company started making safety glasses for motorcyclists, but set up shop in Williston in 2004 to break into the United States military market.
    Workplace Eye Wellness Month puts focus on safety practices

    Reliable Plant Magazine - Mar 05, 2010

    Whether on the job or working on projects around the house, remember to wear proper safety glasses, goggles or face shields. Follow employer guidelines or
    Afghanistan battle shows war rarely fought to plan

    The Associated Press - Feb 22, 2010

    He wore safety glasses and cursed because his gun wasn't working properly. It was difficult to pinpoint the shooters. "I can't see where it's coming from,"
    Workers pick through garbage, revealing our waste

    Kansas.com - Feb 23, 2010

    Workers pick through garbage, revealing our waste The workers wore coveralls, shoe covers, two types of gloves, safety glasses and vapor masks. The crews picked their way past batteries, furniture,
    Pains, Gains, Perils of Laser Eye Surgery

    Korea Times - Mar 07, 2010

    It is no secret that eye surgeons themselves prefer wearing glasses or contact lenses to surgery, because their job requires reliable and acute vision.